Turbochargers are undeniably hot. This part of your car becomes handy when adding an extra boost to your driving experience. But you need to cool down the hot compressed air produced by the turbocharger. Here, an intercooler becomes important.
Top 10 Best Intercooler [year]
- 【Reliable Materials】:This turbo intercooler outlet hose kit is made of high quality silicone rubber with aramid fiber in the middle, which meets the requirements of high temperature resistance, oil resistance and corrosion resistance, was built for long-life service.
- 【 Error Code P00BD 】:A hole develops over time in the hose causing loss of turbo boost power and higher fuel consumption. It may also cause a P00BD error code for Mass or Volume A Circuit Range/Performance Air Flow Too High. Often people change the MAF (Mass Air Flow) sensor but most likely its a cracked or burst of the intercooler outlet hose.
- 【Replace Part Number】:HC3Z-6F073-B
- 【Fitment】:This turbo intercooler charge tube kit replacement is compatible with Ford F-250 F-350 Super Duty 6.7L PowerStroke 2017-2019
- 【Easy Installation】:The installation for this cold side intercooler hose kit is quite easy, no special tools are required.
- This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement.The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line.
- Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention.
- Quick installation,easy slip-on. Direct replace your old damaged or rusted one. You may require to modify it.
- Intercooler Piping Set Includes:1 x Intercooler; 6 x 90 Degree Long-Pipe; 4 x 90 Degree Short-Pipe; 2 x Straight Pipe; 12 x Silicone Hose; 24 x T Bolt Clamp
- Pipe OD: 3 ", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm
- The tube set is mainly used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line
- Anodized T6061 aluminum and polished surface pipes resist wear, rust and corrosion for extra durability
- Universal fitment, depending on the size of your Intercooler
- Package Includes: 2 x Straight Aluminum Pipes; 2 x 45 Degree Aluminum Pipes; 2 x 90 Degree Aluminum Pipes; 2 x 180 Degree Aluminum U Pipes; 2 x 90 Degree Silicone Hose + 6 x Straight hose; 16 x Stainless Steel T-Clamps
- 【FITMENT】The intercooler U-pipe kit is designed for turbo DIY project, refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line.
- 【PREMIUM QUALITY】Premium T6061 aluminum and great strength silicone can be resistant to easy wear, corrosion and rust, providing you with more durable use.
- 【PACKAGE LIST】The intercooler U-pipe kit includes 2x Straight Aluminum Pipes, 2x 45 Degree Aluminum Pipes, 2x 90 Degree Aluminum Pipes, 2x Aluminum U Pipes, 2x 90 Degree Silicone Hose, 6x Straight Hose, 16x Stainless Steel T-Clamps.
- 【FEATURE】It is a universal fit for you to improve air flow. The polished surface can offer you with both charming look and long service life.
- 【SERVICE】If you have any troubles about this item, please feel free to contact us. We will reply within 24 hours. Thanks for your support.
- Heavy-Duty 6061 Aluminum Construction for Maximum Durability – Our intercooler pipe is lightweight yet exceptionally strong, offering excellent heat resistance, corrosion protection, and long-term reliability. Unlike factory plastic or rubber piping, this aluminum upgrade delivers a more durable option designed to resist cracking and maintain dependable operation over time.
- Precision CNC-Mandrel Bent 3-Inch Tubing for Optimized Airflow – Provides smoother, more consistent airflow by reducing turbulence. The CNC-machined construction ensures an exact fit for reliable integration with your system. Designed for durability and consistent performance under demanding conditions.
- Reinforced 4-Ply Silicone Boots – Engineered to handle high boost pressures (tested up to 400 PSI) while maintaining a secure, leak-resistant connection. The reinforced walls improve heat resistance and prevent deformation, delivering dependable performance in demanding applications including towing, off-road use, and other heavy-duty conditions.
- Stainless Steel Spring-Loaded T-Bolt Clamps – Each connection is secured with industrial-grade stainless steel T-bolt clamps, engineered for tight, slip-resistant sealing. The spring-loaded design automatically adjusts to temperature fluctuations, ensuring consistent clamping force and eliminating boost leaks, power loss, and inefficient turbo performance.
- Direct Fit Replacement - A direct replacement for HC3Z-6F073-A, HC3Z-6F073-B, & PC3Z-6F073-B, ensuring proper fitment with factory or aftermarket intercoolers.
- Six threaded mounting points for universal fitment
- Overall Size: 28" x 7.5" x 2.5" / Core Size: 20.5" x 6.25" x 2.5"
- Inlet & Outlet: 2.5" / Tank Wall Thickness: 5mm / Max PSI: 22
- Solid all-welded construction for maximum strength and safety; Not easy to crack or break; This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention
- Quick installation,easy slip-on; Direct replace your old damaged or rusted one; You may require to modify it
- Solid all-welded construction for maximum strength and safety; Not easy to or break; This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention
- Direct Fit for 2017–2026 6.7L Powerstroke: Designed specifically for Ford Super Duty trucks, this charge pipe delivers a perfect OEM fit with no modifications required—just bolt it on and go.
- 2017-2019 Model Year F250/F350 ONLY - 50 State Legal & CARB Compliant
- Replaces Weak Factory Pipe: Eliminates the failure-prone stock plastic intercooler pipe that can crack or blow out under boost, providing long-lasting reliability and peace of mind.
- Powder-Coated Sinister Blue Finish: Finished in our signature Sinister Blue powder coat to resist corrosion, provide durability, and add a clean, aggressive look under the hood.
- Complete Installation Kit Included: Comes with premium silicone boots, stainless steel T-bolt clamps, new O-ring, and retaining clip for a secure, leak-free, hassle-free installation.
- Pipe OD: 2.5 ", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm
- The tube set is mainly used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line
- Anodized T6061 aluminum and polished surface pipes resist wear, rust and corrosion for extra durability
- Universal fitment, depending on the size of your Intercooler
- Package Includes: 2 x Straight Aluminum Pipes; 2 x 45 Degree Aluminum Pipes; 2 x 90 Degree Aluminum Pipes; 2 x 180 Degree Aluminum U Pipes; 2 x 90 Degree Silicone Hose + 6 x Straight hose; 16 x Stainless Steel T-Clamps
- [REPLACE PART NUMBER] HC3Z-6F073-B
- [COMPATIBLE WITH] Compatible with 2017-2019 Ford F-250 Super Duty 6.7L PowerStroke, compatible with 2017-2019 Ford F-350 Super Duty 6.7L PowerStroke
- [HIGH QUALITY] Made of high-quality materials, giving the product a longer lifespan. This product is a good substitute for OEM parts
- [PACKAGE INCLUDE] 1x turbo intercooler outlet tube
- [NOTICE] For any reason, if you are not satisfied with your purchase, contact us directly
Top 4 Best Intercooler Reviews
The market has loads of brands and models of intercoolers. This makes it hard for you to pick the best. But there’s nothing for you to worry about. We have prepared a list of thoroughly reviewed intercoolers available in the market. Remember to weigh the pros and cons of the product before placing an order. So, let’s start our rundown of the best in the market.
Mishimoto Universal Intercooler Z-Line
- Six threaded mounting points for universal fitment
- Overall size: 28” x 7.5” x 2.5” / Core size: 20.5” x 6.25” x 2.5”
- Inlet & outlet: 2.5” / Tank wall thickness: 5 millimeter / Max PSI: 22
- Robust, 1-piece cast aluminum end tanks withstand high boost pressures
- Mishimoto lifetime warranty
Mishimoto Universal Intercooler Z- line is a high-quality intercooler. If you’re looking for a device to withstand heat and compression, this item would be great for you. This product has great reviews that raise the interest of many buyers. Plus, it has an awesome black color and excellent cooling capacity.
It is 6061 aluminum and constructed to perfection. It has a total size of 28″ x 7.5″ x 2.5″, and its size can withstand high-boost pressures.
Pros:
- It can withstand high horsepower and various types of weather
- This is a perfect fit for compact cars
- It has a perfect cooling process. It lessens the pressure, and the produced heat of the car
Cons:
- It is universal, but it may not fit to many car turbos. Thus, there is a need for some to customize and resize it.
- It is average, unlike bigger intercoolers
- It costs more than other brands
AJP Distributors Universal 31″ x 11″ x 3″ Aluminum Tube
No products found.
AJP Distributors first released this product last July 26, 2015. It comprises aluminum, which is lightweight. It has a tube and fin design. All TG Wielded 6061 Aluminum and has a max PSI of 30 which ranges up to 400HP. PSI Drop under 0.2 while others usually drop 10 PSI or more. The core size is 23.5@ x 11″ with 2.8″ inlet/outlet. Its thread pitch is M8-1.25.
Pros:
- The seller responds to buyer’s queries.
- The product comes with nuts and bolts with some flat straps. A custom setup is a must.
- It cools well and is sturdy.
- Comes with threaded mounting tabs mounted on so fabricating brackets are easier.
- It is lighter than expected
Cons:
- Brackets are not included. One has to fabricate it by themselves.
- Since it is universal, need to measure if this is the size that you need.
- It’s not made for any specific vehicles.
- It’s out of stock at the moment and there’s no update whether or when will the item be back in stock.
Mishimoto Universal Intercooler G-Line, Black
- Four M8 x 1.25 threaded universal mounting points
- Overall Size: 24.5” x 11.75” x 3” / Core Size: 17.5” x 11.75” x 3”
- Inlet & Outlet: 3” / Tank Wall Thickness: 5mm / Max PSI: 32
- Robust, one-piece cast aluminum end tanks withstand high boost pressures
- Mishimoto Lifetime Warranty
I was looking for an intercooler at Amazon when I stumbled upon a brand named Mishimoto. The sleek and minimalist design of this product first caught my attention. This intercooler is perfect for those who only need smaller turbo applications. It has four M8 x 1.25 threaded universal mounting points and an 24.5″ x 11.75″ x 3″ overall size. Its tank wall is 5mm thick and the inlet and outlet size is 3″ and weighs about 6.35 pounds. There are three variations of color: Black, Bronze and White.
Pros:
- Lifetime warranty
- 6061 Aluminum that can withstand high boost pressure
- Mishimoto’s intercooler is engineered to have a low pressure drop to sustain efficacy.
- Reduces air temperature.
- Premium packaging to protect the product during shipment.
- Perfect for tight location front mount
- Great value for money.
- Easy to install
- Fits perfectly
Cons:
- Measurement describe were not accurate
AJP Distributors Universal FMIC Front Mount Intercooler
- Compatible/Replacement For: Universal, NOT A DIRECT BOLT ON
- Manufacturer Part Number: IC-SI1201-BK-AMA-L1
- Warranty: Yes
- Condition: New
- Installation Guide: Not Included; Professional installation is highly recommended
Another brand of intercooler is the AJP Distributors Universal FMIC Front Mount Intercooler. This product comes in two colors, black and silver made of aluminum.
The tube and fin design are lightweight, with a specific measurement of 27.5’’ X 7″ x 2.375″. It also has an all TIG Welded 6601 Aluminum. The measurement of the inlet is 2.5″ and weighs 7.81 pounds.
Pros:
- Modification through requiring installations
- Easy to assemble and install
- It has thin fins, which make it bendable
Cons:
- No installation guides included in the package
- Has poorly done welds
- Can cause leakages
Conclusion
Among all intercoolers out in the market today, these four are the best. Its cooling construction performs at its best. All these intercoolers can assist your engine in maintaining cooler air. These intercoolers also have lower pressure drop to keep your setup efficient. They can withstand high boost pressures that are the usual cause of engine failure.