Top 10 Best Rocker Molding Reviews & Comparison

Confused about choosing the best rocker molding 2022? You will be satisfied with the reviews and comparisons in this article.

It’s no secret that cars play a huge role in our lives. Not only do they get us from Point A to Point B, but they can also be a reflection of our personality and style. And while most people think of the car itself when it comes to personalizing their ride, there are actually a ton of great rocker molding on the market today that can help you do just that.

Whether you’re looking for ways to make your car more comfortable or want to enhance its performance on the road, there’s an accessory out there for you. Here are ten of the best rocker molding available today, each one designed to make your life behind the wheel just a little bit easier and more enjoyable.

Best Rocker Molding You Can Buy 2022

Bestseller No. 1
Mean Mug Auto 71315-18133A 15x Rocker Panel Retainer Molding Clip with Sealer Replaces OEM Chrysler Jeep 68172491AA GM Buick Chevy GMC 11571175 19352782
  • Size - Top Head: 12mm x 20mm, Bottom Head: 12mm x 20mm, Fits Into Hole 9mm
  • Interchangeable with the OEM part numbers Chrysler Jeep 68172491AA 68271803AA 68395627AA GM Buick Chevy GMC11571175 19352782
  • Compatible with Buick: Enclave, Encore, Envision, Terraza; Fit for Cadillac: ATS, CTS, ELR, SRX, XTS; Fit for Chevrolet: Bolt EV, Camaro, Colorado, Cruze, Equinox, Impala, Malibu, Orlando, Sonic, Spark, Suburban, Tahoe, Traverse, Trax, Uplander, Volt; Fit for GMC: Acadia, Terrain, Yukon, Pontiac: Montana, Saturn: Outlook, Relay; Fit for Chrysler: 200 Jeep: Cherokee, Grand Cherokee
  • Ruggedly built from the high quality nylon material to last years with your vehicle. Just replace your old Retainer Clips and never think about it again
  • Here's what you'll receive: 15x Rocker Panel Retainer Molding Clips with Sealer, with warranty.
Bestseller No. 2
Rexka 30pcs Rocker Molding Retainer Clip Screw Compatible with Ford W716352-S300 Edge Escape F-150 Mustang Lincoln Continental MKX W716352S300
  • Other Names:Side Molding Retainer, Lower Molding Retainer, Wheel Opening Molding Clip, Rocker Molding Pin, Lower Molding Retainer Clip, Lower Molding Screw, Wheel Opening Molding Screw, Front Retainer Rivet, Rear Deflector Retainer, Screw
  • White Nylon. Top Head Size: 12mm x 20mm Bottom Head Size: 12mm x 20mm Stem Length: 14mm Fits Into 9mm Hole
  • Replaces Ford W716352-S300 Fit: Ford Edge Escape Expedition F-150 Fiesta Mustang; Lincoln Continental MKX
  • Positions:Left Lower, Left Front, Left Rear, Right Lower, Right Front, Right Rear
  • Meet or Exceed OEM Specification.Direct Fitment
SaleBestseller No. 3
Pacer Performance 22-243 Black 20' x 4" Wide Rocker Panel Side Molding Kit
  • Package Dimensions: 10 L x7 H x9 W (inches)
  • Package Weight: 6.5 pounds
  • Country of Origin : United States
  • Part Number: 22-243
Bestseller No. 4
Mean Mug Auto 81514-18133A 50x Rocker Panel Molding Fastener Retainer Clips - Compatible with Honda, Acura - Replaces OEM #: 91513-SM4-000
  • Quality Features: These Clips are Precision-Engineered to best fit into your rocker panel molding and keeping it fit for long time. They are made of high quality white Nylon material for long lasting. Size: Width: 20mm, Length: 20mm, Fits into 12mm hole
  • Compatible with Honda : Civic 1992-2000 | CR-V 1997-2001 | Del Sol 1993-2007 | Element 2003-2001 | Accord 1990-2007 | Accord Hybrid 2005-2007 | Pilot 2003-2015 | Prelude 1992-2001 | Odyssey 1995-2004
  • Compatible with Acura : CL 1997-2001 | Integra 1994-2001 | Legend 1991-1995 | MDX 2001-2006 | RL 1996-2004 | RSX 2002-2006 | TL 1995-2008 | TSX 2004-2014 | Vigor 1992-1994
  • Replacement OEM Number : 91513-SM4-000, 91513 sm4 000 Rocker panel molding clips, Compatible with Honda, Acura and exactly fit for them as OEM clips. Just replace your old broken rocker panel clips with Mean Mug Auto clips for your strong vehicle body grip.
  • Package Include : 50x Rocker Panel Molding Fastener Retainer Clips, with warranty
Bestseller No. 5
Rexka 20pcs Rocker Molding Clip for Hyundai Kia 87756-2E000
  • Other Names: Cladding Clip, Body Side Molding Clip, Wheel Opening Molding Clip, Wheel Flare Clip, Front Rocker Molding Retainer, Rear Rocker Molding Retainer, Rocker Molding Rear Clip, Front Rocker Molding Clip, Rear Rocker Molding Clip, Side Rail Assembly Clip, Tail Gate Molding Clip, Trim Molding Clip, Rocker Molding Fastener, Clip-Side Garnish Mt
  • Notes(Hyundai): Included With Rear Rocker Molding. Included With Front Rocker Molding. Included With Wheel Opening Molding. Included With Body Side Molding. Included With Cladding
  • Notes (Kia): Included With Rear Rocker Molding. Included With Front Rocker Molding. Included With Wheel Opening Molding. Included With Body Side Molding. Included With Tail Gate Molding. Included With Cladding. Included With Wheel Flare. Part Included Side Rail Assembly.
  • Replaces Hyundai: 87756-2E000, Fits: Hyundai: Entourage, Santa Fe, Sonata, Tucson, Veloster, Veracruz; Fits: Kia: Forte Koup, Optima, Rondo, Sedona, Sorento, Soul, Spectra, Spectra5, Sportage
  • Meet or Exceed OEM Specification. Direct Fitment.White Nylon, Top Head Size: 10mm x 12mm Bottom Head Size: 14mm x 20mm Stem Length: 10mm
Bestseller No. 6
Rexka 10pcs Rocker Molding Retainer Clips Compatible with GM 25648693 Cadillac CTS Deville Seville SRX Hummer H3 H3T
  • Other Names: Lower Molding Retainer, Rocker Molding Clip, Retainer
  • Gray Nylon, 7/8" Wide, 2" Long
  • Replaces GM: 25648693, Fits Cadillac: CTS 2003-2010, Deville 1998-2004, Seville 1998-2004, SRX 2004-2005; Hummer: H3 2006-2010, H3T 2009-2010
  • Meet or Exceed OEM Specification
Bestseller No. 7
ECOTRIC Door Exterior Rocker Panel Molding Trim Rail Compatible with 2008-2014 Dodge Challenger 1 Pair
  • Fitment - Compatible with 2008-2014 Dodge Challenger. Please Double-Check that this is compatible with your vehicle.
  • Feature - Brand New, Never mounted. Color: Black. Placement On Vehicle: Left&Right Driver&Passenger Side. This rocker panel would be an excellent choice to give your vehicle a new style and look.
  • High Quality - This product is built to strict quality control standards. Quality construction prevents cracking, fading, and chalking. Maximizing ensure strength and durability for long lasting usage.
  • Perfect Match - Custom molded and precision engineered to fit your car model's rocker panel. Perfect Fitting makes it unlike any other rocker panel. Hardware is not included. Professional installation is highly recommended.
  • Service - Simple to install. If your items encounter any adaptation or color difference or anything-else problems, please feel free to contact and give us the opportunity to replace the item/part, and we will provide you with perfect and guaranteed service.
Bestseller No. 8
1992-1996 Ford Black Chrome Side Body Trim Molding Rocker Panel Pickup Truck F150, F250, F350, Bronco - 2" Wide (Half Roll - 12 ft)
  • 1992-1996 Ford 2" Side Body Molding Replacement - This molding is used on: F150, F250, F350, Bronco
  • Roll Length: 12 Feet
  • Select Your Molding Length Based on your Cab Size, Bed Length, and Project
  • Please measure your Ram prior to purchasing to ensure you will have enough trim to complete the job
  • The trim is proudly Made In America. The trim is rated for UV protection to ensure it will hold up against the weather. The trim has an adhesive on the back to ensure a strong and long lasting hold.
Bestseller No. 9
OAUTOO 20PCS Wheel Opening Rocker Molding Lower Clip for Hyundai & Kia 87758G2000
  • Other Names:Rocker Molding Retainer, Finish Molding Retainer Clip, Wheel Opening Molding Clip, Rocker Molding Lower Clip, Wheel Opening Molding Retainer, Rocker Molding Clip, Clip Side Sill Molding Mtg
  • Top Head Size: 17.8 X 16mm, Bottom Head Size: 32.5 X 18mm, Stem Size: 14.5 X 9.5mm, Stem Length: 10mm.
  • Compatible with: Hyundai & Kia 87758G2000
  • Fits Hyundai Ioniq 2017-2022, Hyundai Nexo 2019-2020, Hyundai Palisade 2020-2022, Hyundai Santa Fe 2019-2022, Hyundai Sonata 2020-2022, Hyundai Tucson 2022; Kia K5 2021, Kia Telluride 2020-2021.
  • Unit Package: 20pcs
Bestseller No. 10
TRUE LINE Automotive 2 Piece Chrome Rocker Trim Molding Kit
  • This DIY kit includes 2 8 foot long pieces that measure 5/8 inch wide.
  • Item is back with 3m tape for easy installation.
  • Product is made of a high quality flexible automotive molding.
  • Installer must trim the pieces to fit. Can be done easily with a pare of scissors.

How To Personalize Your Car With Rocker Molding

Now that you have a good idea of what kind of rocker molding you can use to personalize your car, it’s time to start shopping! Here are a few tips to help you get started:

  • Decide on a theme or colour scheme for your car. This will make it easier to choose rocker molding that match.
  • Consider your lifestyle and needs when choosing gadgets and accessories. If you frequently drive long distances, for example, you may want a GPS system or a travel charger for your phone.
  • Shop around online and in stores to find the best deals on rocker molding. Be sure to compare prices before making a purchase.
  • Read reviews of rocker molding before buying them. This can help you avoid buying rocker molding that are low quality or don’t work well.
  • Have fun with it! Personalizing your car is a great way to show off your personality and style. So go ahead and get creative!

How We Test To Choose The Best Rocker Molding

The next step is to test the rocker molding to see which one is the best. We use a variety of methods to test the rocker molding, including user reviews, price comparisons, and quality tests. We want to find the best rocker molding for our customers, so we make sure to test everything thoroughly.

User Reviews: We read through 21324 user reviews to find out what people think of the products we’re considering. We pay attention to both positive and negative reviews, and we take all of them into account when making our decision.

Price Comparisons: We compare the prices of the rocker molding we’re considering to make sure that we’re getting the best value for our money. We want to make sure that our customers are happy with their purchase, so we only choose rocker molding that offers good value.

Quality Tests: We test the rocker molding ourselves to see how they perform in real-world situations. We use them for everything car model, and we make sure to give them a thorough workout. This way, we can be sure that they’re up to our high standards.

Once we’ve gone through all of this testing, we’re able to choose the best rocker molding for our customers. We want to make sure that they’re happy with their purchase, so we only choose rocker molding that we would be happy with ourselves.

What Need To Know About The Rocker Molding Before Buying?

  • What is the rocker molding made of?
  • How does it work?
  • What are the benefits of using the rocker molding?
  • Is the rocker molding safe to use?
  • Are there any side effects associated with using the rocker molding?
  • How much does the rocker molding cost?
  • Where can I buy the rocker molding?

Factors To Consider When Choosing The Best Rocker Molding?

When it comes time to choose a rocker molding, there are a few things you need to keep in mind. You want to make sure that you are getting the best rocker molding for your needs and that you aren’t overspending on something that you don’t need. Here are a few tips on how to choose the best rocker molding:

Know What You Need

This is probably the most important thing to keep in mind when choosing a rocker moldingt. If you don’t know what you need, how can you pick the right one? Do some research and figure out what type of rocker molding you need.

Set a Budget

Once you know what type of rocker molding you need, set a budget for yourself. This will help narrow down your choices and make it easier to find the best product for your needs.

Consider Your Needs

Not all products are created equal- some products are better suited for certain needs than others. Make sure to consider your specific needs when choosing a rocker molding.

Read Reviews

One of the best ways to figure out if a rocker molding is right for you is to read reviews from other consumers. This can give you an idea of what to expect from the rocker molding and help you decide if it’s the right choice for you.

Compare Prices

Once you know what type of rocker molding you want and have read reviews, it’s time to start comparing prices. This will help you find the best deal on the best rocker molding for your needs.

How To Save Money When Buying Online Rocker Molding

There are a few ways to save money when buying online. 

One way is to use a coupon code. You can find coupon codes online by doing a Google search or by visiting websites. 

Another way to save money is to sign up for a loyalty program or rewards program offered by the retailer you’re shopping with. Many retailers offer discounts, free shipping, and other perks to shoppers who sign up for their loyalty programs. 

Finally, try shopping with a retailer that offers price matching. If you find a rocker molding you want on another website at a lower price, many retailers will match the price if you provide them with proof of the lower price.

FAQs

What Are The Benefits Of The Best Rocker Molding?

The benefits of the best rocker molding are they work well, and you don’t have to replace them as often.

How Much Does Car Maintenance Cost?

The cost of car maintenance varies depending on the make and model of your vehicle, the age and condition of your car, and the services you choose. However, on average, maintenance costs between $600 and $1,200 per year. This includes oil changes, tune-ups, tire rotations, and brake inspections.

How To Make Your Rocker Molding Last Longer?

One of the best ways to make your rocker molding last longer is to keep up with its regular maintenance. This includes oil changes, tune-ups, tire rotations, and brake inspections. Additionally, you should keep your car clean and free of clutter.

Where Can I Buy A Rocker Molding?

You can buy a rocker molding at most automotive stores. You can also purchase a product online.

Bestseller No. 1
Mean Mug Auto 71315-18133A 15x Rocker Panel Retainer Molding Clip with Sealer Replaces OEM Chrysler Jeep 68172491AA GM Buick Chevy GMC 11571175 19352782
  • Size - Top Head: 12mm x 20mm, Bottom Head: 12mm x 20mm, Fits Into Hole 9mm
  • Interchangeable with the OEM part numbers Chrysler Jeep 68172491AA 68271803AA 68395627AA GM Buick Chevy GMC11571175 19352782
  • Compatible with Buick: Enclave, Encore, Envision, Terraza; Fit for Cadillac: ATS, CTS, ELR, SRX, XTS; Fit for Chevrolet: Bolt EV, Camaro, Colorado, Cruze, Equinox, Impala, Malibu, Orlando, Sonic, Spark, Suburban, Tahoe, Traverse, Trax, Uplander, Volt; Fit for GMC: Acadia, Terrain, Yukon, Pontiac: Montana, Saturn: Outlook, Relay; Fit for Chrysler: 200 Jeep: Cherokee, Grand Cherokee
  • Ruggedly built from the high quality nylon material to last years with your vehicle. Just replace your old Retainer Clips and never think about it again
  • Here's what you'll receive: 15x Rocker Panel Retainer Molding Clips with Sealer, with warranty.
Bestseller No. 2
Rexka 30pcs Rocker Molding Retainer Clip Screw Compatible with Ford W716352-S300 Edge Escape F-150 Mustang Lincoln Continental MKX W716352S300
  • Other Names:Side Molding Retainer, Lower Molding Retainer, Wheel Opening Molding Clip, Rocker Molding Pin, Lower Molding Retainer Clip, Lower Molding Screw, Wheel Opening Molding Screw, Front Retainer Rivet, Rear Deflector Retainer, Screw
  • White Nylon. Top Head Size: 12mm x 20mm Bottom Head Size: 12mm x 20mm Stem Length: 14mm Fits Into 9mm Hole
  • Replaces Ford W716352-S300 Fit: Ford Edge Escape Expedition F-150 Fiesta Mustang; Lincoln Continental MKX
  • Positions:Left Lower, Left Front, Left Rear, Right Lower, Right Front, Right Rear
  • Meet or Exceed OEM Specification.Direct Fitment
SaleBestseller No. 3
Pacer Performance 22-243 Black 20' x 4" Wide Rocker Panel Side Molding Kit
  • Package Dimensions: 10 L x7 H x9 W (inches)
  • Package Weight: 6.5 pounds
  • Country of Origin : United States
  • Part Number: 22-243
Bestseller No. 4
Mean Mug Auto 81514-18133A 50x Rocker Panel Molding Fastener Retainer Clips - Compatible with Honda, Acura - Replaces OEM #: 91513-SM4-000
  • Quality Features: These Clips are Precision-Engineered to best fit into your rocker panel molding and keeping it fit for long time. They are made of high quality white Nylon material for long lasting. Size: Width: 20mm, Length: 20mm, Fits into 12mm hole
  • Compatible with Honda : Civic 1992-2000 | CR-V 1997-2001 | Del Sol 1993-2007 | Element 2003-2001 | Accord 1990-2007 | Accord Hybrid 2005-2007 | Pilot 2003-2015 | Prelude 1992-2001 | Odyssey 1995-2004
  • Compatible with Acura : CL 1997-2001 | Integra 1994-2001 | Legend 1991-1995 | MDX 2001-2006 | RL 1996-2004 | RSX 2002-2006 | TL 1995-2008 | TSX 2004-2014 | Vigor 1992-1994
  • Replacement OEM Number : 91513-SM4-000, 91513 sm4 000 Rocker panel molding clips, Compatible with Honda, Acura and exactly fit for them as OEM clips. Just replace your old broken rocker panel clips with Mean Mug Auto clips for your strong vehicle body grip.
  • Package Include : 50x Rocker Panel Molding Fastener Retainer Clips, with warranty
Bestseller No. 5
Rexka 20pcs Rocker Molding Clip for Hyundai Kia 87756-2E000
  • Other Names: Cladding Clip, Body Side Molding Clip, Wheel Opening Molding Clip, Wheel Flare Clip, Front Rocker Molding Retainer, Rear Rocker Molding Retainer, Rocker Molding Rear Clip, Front Rocker Molding Clip, Rear Rocker Molding Clip, Side Rail Assembly Clip, Tail Gate Molding Clip, Trim Molding Clip, Rocker Molding Fastener, Clip-Side Garnish Mt
  • Notes(Hyundai): Included With Rear Rocker Molding. Included With Front Rocker Molding. Included With Wheel Opening Molding. Included With Body Side Molding. Included With Cladding
  • Notes (Kia): Included With Rear Rocker Molding. Included With Front Rocker Molding. Included With Wheel Opening Molding. Included With Body Side Molding. Included With Tail Gate Molding. Included With Cladding. Included With Wheel Flare. Part Included Side Rail Assembly.
  • Replaces Hyundai: 87756-2E000, Fits: Hyundai: Entourage, Santa Fe, Sonata, Tucson, Veloster, Veracruz; Fits: Kia: Forte Koup, Optima, Rondo, Sedona, Sorento, Soul, Spectra, Spectra5, Sportage
  • Meet or Exceed OEM Specification. Direct Fitment.White Nylon, Top Head Size: 10mm x 12mm Bottom Head Size: 14mm x 20mm Stem Length: 10mm
Bestseller No. 6
Rexka 10pcs Rocker Molding Retainer Clips Compatible with GM 25648693 Cadillac CTS Deville Seville SRX Hummer H3 H3T
  • Other Names: Lower Molding Retainer, Rocker Molding Clip, Retainer
  • Gray Nylon, 7/8" Wide, 2" Long
  • Replaces GM: 25648693, Fits Cadillac: CTS 2003-2010, Deville 1998-2004, Seville 1998-2004, SRX 2004-2005; Hummer: H3 2006-2010, H3T 2009-2010
  • Meet or Exceed OEM Specification
Bestseller No. 7
ECOTRIC Door Exterior Rocker Panel Molding Trim Rail Compatible with 2008-2014 Dodge Challenger 1 Pair
  • Fitment - Compatible with 2008-2014 Dodge Challenger. Please Double-Check that this is compatible with your vehicle.
  • Feature - Brand New, Never mounted. Color: Black. Placement On Vehicle: Left&Right Driver&Passenger Side. This rocker panel would be an excellent choice to give your vehicle a new style and look.
  • High Quality - This product is built to strict quality control standards. Quality construction prevents cracking, fading, and chalking. Maximizing ensure strength and durability for long lasting usage.
  • Perfect Match - Custom molded and precision engineered to fit your car model's rocker panel. Perfect Fitting makes it unlike any other rocker panel. Hardware is not included. Professional installation is highly recommended.
  • Service - Simple to install. If your items encounter any adaptation or color difference or anything-else problems, please feel free to contact and give us the opportunity to replace the item/part, and we will provide you with perfect and guaranteed service.
Bestseller No. 8
1992-1996 Ford Black Chrome Side Body Trim Molding Rocker Panel Pickup Truck F150, F250, F350, Bronco - 2" Wide (Half Roll - 12 ft)
  • 1992-1996 Ford 2" Side Body Molding Replacement - This molding is used on: F150, F250, F350, Bronco
  • Roll Length: 12 Feet
  • Select Your Molding Length Based on your Cab Size, Bed Length, and Project
  • Please measure your Ram prior to purchasing to ensure you will have enough trim to complete the job
  • The trim is proudly Made In America. The trim is rated for UV protection to ensure it will hold up against the weather. The trim has an adhesive on the back to ensure a strong and long lasting hold.
Bestseller No. 9
OAUTOO 20PCS Wheel Opening Rocker Molding Lower Clip for Hyundai & Kia 87758G2000
  • Other Names:Rocker Molding Retainer, Finish Molding Retainer Clip, Wheel Opening Molding Clip, Rocker Molding Lower Clip, Wheel Opening Molding Retainer, Rocker Molding Clip, Clip Side Sill Molding Mtg
  • Top Head Size: 17.8 X 16mm, Bottom Head Size: 32.5 X 18mm, Stem Size: 14.5 X 9.5mm, Stem Length: 10mm.
  • Compatible with: Hyundai & Kia 87758G2000
  • Fits Hyundai Ioniq 2017-2022, Hyundai Nexo 2019-2020, Hyundai Palisade 2020-2022, Hyundai Santa Fe 2019-2022, Hyundai Sonata 2020-2022, Hyundai Tucson 2022; Kia K5 2021, Kia Telluride 2020-2021.
  • Unit Package: 20pcs
Bestseller No. 10
TRUE LINE Automotive 2 Piece Chrome Rocker Trim Molding Kit
  • This DIY kit includes 2 8 foot long pieces that measure 5/8 inch wide.
  • Item is back with 3m tape for easy installation.
  • Product is made of a high quality flexible automotive molding.
  • Installer must trim the pieces to fit. Can be done easily with a pare of scissors.

Bottom Line

Though it’s not required to have a car in order to live, it is most certainly a convenience that many of us cannot do without. Not only does having a car equipping it with rocker molding make getting around town much easier, but it also opens up opportunities for travel and exploration that would be more difficult (or impossible) to undertake otherwise. 

In addition, owning a car provides an added layer of security and independence, which can be especially important for those who live in areas with limited public transportation options.

Finally, cars are often seen as status symbols, so having one can boost your social standing amongst friends and family members. While there are many benefits to owning a car, there are also some drawbacks. 

Cars require regular maintenance and repairs, and they can be expensive to insure and park. They also produce harmful emissions that negatively impact the environment. Despite these downsides, I believe that the pros of owning a car outweigh the cons by a wide margin. What do you think?

Leave a Comment