For most car enthusiasts, it has been a tradition to replace a typical car cat-back exhaust with a turbo-back exhaust. Essentially, a turbo back exhaust system is a new and improved version in a vehicle where the turbocharger engine uses as an outlet to the open air.
Top 10 Best 5 Inch Turbo Back Exhaust 5 9 Cummins – 2024
- Specification: 18-Gauge Piping Walls, Inlet / Outlet Size (IN) : 2.5" OD
- Easy To Use: Slip Fit Joints to Provide Easiest Fabrication
- Universal Kit: 2 pcs 48" Straight Pipes, 2 pcs 90 Degree Pipes, 2 pcs 45 Degree Pipes, 2 pcs 180 Degree U-Bends
- Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It
- Walker Heavy Duty 41994 Exhaust Reduction Pipe 5" Inlet (OD) 4" Outlet (ID)
- COMPATIBILITY – Fits
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- Offered in a variety of styles and sizes for your installation needs
- Manufactured from aluminized steel for durability
- This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls
- 16-Gauge Piping Walls Of This Custom Exhaust Kit
- 2 X 48" Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures.
- Each 3" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation
- J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs. Exhaustweld Can Resist Up To 1100°F Once It Is Fully Cured
- Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By Letting The Engine Run. Without Heat, Exhaustweld Will Set In 20 Minutes And Cure In 2 Hours
- High Heat Resistance: Once Fully Cured, J-B Weld Exhaustweld Exhaust System Repair Wrap Has A Temperature Resistance Of 1100°F, Allowing It To Be Used On Every Part Of The Exhaust System
- Applications: Manifolds, Catalytic Converters, Mufflers, Tailpipes And More
- Performance Dual Exhaust for Ram, Ford F-Series, Silverado & Sierra trucks
- Single 3 inch inlet /Dual 2.5 inch outlet Flowmaster Super 44 Muffler
- Two 2.5 inch high-flow mandrel-bent tailpipes, cut and swedged
- Two 3.5 inch x18 inch WELD-ON angle-cut chrome tips
- Dambach, Charles F (Author)
- English (Publication Language)
- 350 Pages - 05/01/2020 (Publication Date) - Apprentice House (Publisher)
- Pipes Have Been Upgraded To Stainless Steel; Flex Joints & Flange Still Made Of Standard Steel For Natural Thermal Expansion/Contraction
- Package Include: 1 x Exhaust Manifold, all necessary gaskets and downpipe hardware; Included heat shield, Includes flex bellows
- Replace Part Number: 33007072, 4883385, 674-196, 10105812
- Replacement For Jeep Cherokee L6 4.0L 1991-1999; Replacement For Jeep Comanche (MJ) L6 4.0L 1991-1992; Replacement For Jeep Grand Cherokee L6 4.0L 1993-1998; Replacement For Jeep Wrangler L6 4.0L 1997-1999; Replacement For Jeep Wrangler L6 4.0L 1991-1995; Replacement For Jeep TJ L6 4L 1997-1999
- Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold; Smooth interior of the exhaust manifold; Offers the flow characteristics for the engine at high engine speeds; Soft sound for comfortable driving experience
- Specification: 18-Gauge Piping Walls, Inlet / Outlet Size (IN) : 2.5" OD
- Easy To Use: Slip Fit Joints to Provide Easiest Fabrication
- Universal Kit: 4 pcs 48" Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends
- Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate
- DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It
- ✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!
- ✔️ Items are Exactly the Same as Shown in the Images! You Will Receive the Exact Item You Purchased!
- ✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
- ✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
- ✔️ FITMENT: Compatible with Honda Civic 2/4DR EX 2001-2005 models (does not fit SI models).
- Gerr, Dave (Author)
- English (Publication Language)
- 448 Pages - 06/10/2023 (Publication Date) - International Marine/Ragged Mountain Press (Publisher)
Review of 4 Turbo Back Exhaust for 5.9 Cummins
We collected the top four 5 Inch Turbo Back Exhaust that fit your 5.9 Cummins. Each is designed to carry out high performance and bring more power to the engine. Discover the best 5-inch turbo back exhaust especially made for a 5.9 Cummins vehicle.
Diamond Eye K5344A-RP Diesel Exhaust
Aside from its convenient use, this product is one of the frontrunners when it comes to providing the best quality turbo back exhaust for 5.9 Cummins for all the right reasons. It is an all-in-one PDF back system that can replace your existing cat-back exhaust.
It comes with all the needed clamps and components which make installation easy and hassle-free. With the help of a set of the right vehicle tools and you’re good to go.
In addition, this 5-inch turbo back exhaust kit is perfectly designed for 2007-2012 Ram models. The item’s weight is 45.3-pounds and has a measurement of 53x12x21 inches. This product gets our 4.4 out of 5 ratings.
Things We Liked
- All-in-one package
- Fits to 07 Dodge Ram 3500 Mega Cab 6.7 Cummins
- Fits a 2012 Ram 6.7 Cummins with no additional parts needed
- Fits to 2009 Dodge Ram 3500 Cummins
Things We Didn’t Like
- Does not fit the 2001 Dodge Ram
- Does not come with a muffler
MagnaFlow 18951 Large Aluminized Performance Exhaust System Kit
- Mandrel bent tubing
- Aluminized steel construction
- Dyno-proven power
- Straight through muffler
- Made in the USA
This 5-inch large aluminized turbo back exhaust system enters the top list of our recommended products as it comes with a muffler – which is an essential instrument upon installation of the piece. Having to mention the installation procedure, this turbo back kit does not require a welding gadget to mount as long as it matches the right vehicle model.
Everything in one box is the best description for this exhaust kit. It has an adapter section in the front that stems the pipes down to the exhaust to connect it easily. Also, it has a 4-inch dimension.
While for the output, it looks aesthetically great and sounds better, as it helped quiet down the exhaust noise in the vehicle. A well-deserved 4.3 out of 5 rating for this turbo back kit.
Things We Liked
- Aluminized steel construction
- Dyno-proven power
- Works with mandrel bending method
- Does it come with a muffler
- Comes with quality clamps
Things We Didn’t Like
- Does not fit Super Cab with the short bed
Cat Back-Diesel Aluminized Exhaust Kit
- Our parent company specializes in superior catalytic converter technology and has spent the last 30 years earning its reputation as a market leader around the world.
From one of the leading companies that specialize and are known for providing superior car technology, this turbo back exhaust provider is a great purchase for 5.9 Cummins vehicle owners. It is 100% made of stainless steel, so its durability and reliability are unquestionable.
This 5-inch turbo back exhaust kit brings more power and provides quality performance and sound to your engine like no other. The product dimension is 5-inch, and it weighs 48-pounds.
Not only it delivers the best performance, but it has also been fully polished to give that extra shine to be aesthetically good in your vehicle. This product justifies the 4.4 out of 5 ratings we would give.
Things We Liked
- 100% made of stainless steel
- Highly durable
- Well-polished for aesthetic purposes
- Ready and easy to install
- Good fit
- Supply more power and performance to the vehicle
Things We Didn’t Like
- Does not serve as a replacement for CAT or PDF filter
- Does not fit 2011 f250 Crew Cab 6.7
Diamond Eye Manufacturing K4212A-2 Exhaust Kit
This back turbo exhaust enters the list when it comes to providing quality and high performance to your 5.9 Cummins vehicle. It is an all-encompassing unit, as it comes with a muffler for an easy installation procedure.
To highlight its best part, it can suit a 1996 Ram 3500 with a long bed and a 2001 dodge 2500. It works efficiently to provide power and superior performance to the engine.
Made of stainless steel, this back turbo exhaust is guaranteed to be long-lasting and reliable for your vehicle. It carries out good sound quality to your engine. This item weighs 10-pounds and comes in a 4-inch dimension. We will rate this product 3.0 out of 5.
Things We Liked
- Comes with muffler
- 4-inch dimension
- Fits a 1996 Ram 3500 with a long bed
- Fits a 2001 Dodge 2500
- Fits to 02
- Superior performance
- Provides more power
- Ready and easy to install
Things We Didn’t Like
- Does not fit the 1996 Dodge 3500
Conclusion
Searching for the best 5 inch turbo back exhaust 5 9 cummins is a real challenge, especially when it’s done online. There are many things to consider, and one of these is the fitment of the item to your vehicle. With these products and the information provided, purchasing the perfect fit yet quality turbo back exhaust became easier and hassle-free.